Banner SI-RFST-UP8, Инструкция по эксплуатации

Страница: 13 / 27

© Banner Engineering Corp. www.bannerengineering.com 11
I
NSTALLATION
I
NSTRUCTIONS
Figure 4: Wiring for a single PNP
3.8.4. Wiring for a Single 8-Conductor Sensor
The 8-pin sensors have one pair of OSSD outputs (Q1/Q2), one pair of inputs (I1/I2) that must be high (+24 V DC) before the outputs can turn
on, one +24 V DC input, and one 0 V DC input. Some models have a reset input that re24 V DC to reset the unit. Some models have an
Auxillary PNP output (Do). The following table describes the wiring of the different model options.
5 Gray PNP OUT (Auxillary Output) PNP OUT (Auxillary Output)
Pin SXA-8xxD Wire Color
Pin/Wire Function
SI-RFST-xP8 SI-RFSL-xP8 SI-RFDT-xP8 SI-RFDL-xP8
1 White +24 V DC +24 V DC +24 V DC +24 V DC
2 Brown OSSD1 OSSD1 OSSD1 OSSD1
3 Green 0 V DC 0 V DC 0 V DC 0 V DC
4 Yellow OSSD2 OSSD2 OSSD2 OSSD2
5 Gray Input1 Input1 Input1 Input1
6 Pink Input2 Input2 Input2 Input2
7 Blue PNP OUT (Auxillary Output) PNP OUT (Auxillary Output) No Function No Function
8 Red No Function Reset (+ In) No Function Reset (+ In)
Pin Wire Color SI-RFPT-xP5 SI-RFPT-x2M