Banner R-GAGE Q90R, Инструкция по эксплуатации

Страница: 21 / 32

February 12, 2024
Q90R R-GAGE® Radar Sensor Instruction Manual
© Banner Engineering Corp. All rights reserved.
21
Setting Factory Default
Range 4 mA to 20 mA (0 V to 10 V)
4mA/0V Point 0.15 m (0.49 ft)
20mA/10V Point 20.0 m (65.6 ft)
Loss of Signal 3.5 mA (0 V)
Averaging 1× (no averaging)
Setting Factory Default
Output Mode Switch Point
Setpoint 1 20.0 m (65.6 ft)
Hysteresis 0.05 m (2 in)
NO/NC Normally Open
On Delay 0 ms
Off Delay 500 ms
Setting Factory Default
Output Mode Switch Point
Setpoint 1 20.0 m (65.6 ft)
Hysteresis 0.05 m (2 in)
NO/NC Normally Open
On Delay 0 ms
Off Delay 500 ms
Analog Tab Default Settings Table 6.
Discrete 1 Tab Default Settings Table 7.
Discrete 2Tab Default Settings Table 8.
FINAL DRAFT