Two-Point Static Teach
Dynamic Teach
Background Suppression
Foreground Suppression
Top Menu
Sub Menu
off: no delays enabled
on: enable on and/or off delay (set value in Delay Timer menu)
1 Shot, fixed output pulse duration
Total
end: exit setup
Teach Selection CH2
Output CH2
Window Size CH2 **
Output Timing Delays CH2
Offset CH2 ****
Exit Setup
( default setting)
Light Operate
Dark Operate
Complimentary to Output 1
Dual Mode
Adaptive Tracking CH2 *
off: Adaptive Tracking off
High-Speed Adaptive Tracking on
on: Adaptive Tracking on
Channel 2
Adaptive Tracking menu is available when Teach CH2 is set to Dual Mode
laser off when pulled high
laser on when pulled high
set: Remote Teach input
master
slave
pulse
sec range, set Delay Timer value (seconds have decimal)
to
ms
Menu not present when is set to
( and default to 0, defaults to 1 or 10 depending on response speed setting)
Delay Timer CH2 ***
Available when
set to
Available when
set to
available when
set to
or
Menu items only available when
out2 is set to LO or DO
=
Auto
Set Value:
Offset menu is available when Teach CH2 is set to FGS or BGS
-191 cm to 191 cm for 2000 mm models
0.1 to 191 cm for 2000 mm models
Window Size menu is available when Teach CH2 is set to FGS
Set value 0.1 to 200 cm
Sensor controls hysteresis dependent on distance value
Set value -0.1 to -200 cm
Hysteresis CH2
Figure 16. Sensor Menu Map—Channel 2
Q5X Laser Triangulation Sensor with Background Suppression
10
www.bannerengineering.com - Tel: +1.763.544.3164
