Banner Q5X, Быстрый старт

Страница: 4 / 16

July 25, 2023 page 4
(1)
Applying tilt to sensor may improve performance on reflective targets. The direction and magnitude of the tilt depends on the application, but a 15° tilt is often
sufficient.
Q5X with Dual Discrete Outputs and IO-Link Quick Start Guide
Orientation by a wall
Orientation for a moving ob­
ject
Orientation for a height dif­
ference
Orientation for a color or
luster difference
Horizontal
Orientation Orientation
(Optimal)
CC
Orientation for highly reflec­
tive target
(1)
Reflective
Surface
(optional)
Mount the Device
Wiring Diagram
Channel 2 as PNP Discrete or PFM
Output
bk (4)
bn (1)
bu (3)
wh (2)
10-30 V DC
CH1
CH2
+
–
Load
Load
Channel 2 as Remote Input
bk (4)
bn (1)
bu (3)
wh (2)
10-30 V DC CH1
CH2
+
–
Load
Remote Input
1
4
3
2
NOTE: Open lead wires must be connected to a terminal block.
NOTE: The Channel 2 wire function and polarity is user­selectable. The default for the wire is PNP output. Refer to the
Instruction Manual (p/n 208794 ) for details regarding use as a remote input or pulse frequency modulation (PFM) out­
put.
If a bracket is needed, mount the device onto the bracket. 1.
Mount the device (or the device and the bracket) to the machine or equipment at the desired location. Do not tighten the mounting
screws at this time.
2.
Check the device alignment. 3.
Tighten the mounting screws to secure the device (or the device and the bracket) in the aligned position. 4.
© Banner Engineering Corp.