Q5X with Dual Discrete Outputs and IO-Link Quick Start Guide
July 25, 2023
page
7
Button association between the RSD1 and the Q4X/Q5X sensors
Device
Up Button
Down Button
Enter Button
Escape Button
RSD1
Q4X
and
Q5X
N/A
Sensor Programming
Program the sensor using the buttons on the sensor or the remote input (limited programming options).
In addition to programming the sensor, use the remote input to disable the buttons for security, preventing unauthorized or accidental pro
gramming changes. See the Instruction Manual, p/n
208794
for more information.
Setup Mode
Access Setup mode and the sensor menu from Run mode by pressing and holding
MODE
for longer than 2 seconds.
Use
+
and
-
to navigate through the menu. Press
SELECT
to select a menu option and access the submenus. Use
+
and
-
to navigate
through the submenus. Press
SELECT
to select a submenu option and return to the top menu, or press and hold
SELECT
for longer than 2
seconds to select a submenu option and return immediately to Run mode.
To exit Setup mode and return to Run mode, navigate to
End
and press
SELECT
.
NOTE:
The number that follows a menu option, for example
tch1, indicates the channel that is selected. For menu
items without a number (excluding submenu items), these menu options are only available from Channel 1 and the set
tings apply to both channels.
© Banner Engineering Corp.
