Command Channels
Scenario #1
Scenario #2
Scenario #3
Ethernet
Serial I/O
Ethernet
Serial I/O
Ethernet
Serial I/O
Command Channel
Yes
No
No
Yes
Yes
No
Industrial Ethernet
Yes
No
Yes
No
Yes
No
Data Export
Yes
No
Yes
No
No
Yes
Image Export
Yes
No
Yes
No
Yes
No
Multiple Inspections
The iVu BCR supports multiple inspections that facilitate storing and controlling up to 30 inspections of different types of barcodes.
By default, Inspection 1 is crated with Data Matrix and Linear Barcodes enabled.
Adding a New Inspection
To add a new stored inspection:
1. Go to Main Menu > Inspection > Stored Inspections and click Add New.
2. Select Rename to type a new name for the new inspection.
3. Click Done. The new inspection with automatically begin running.
Changing Running Inspections
To change the running inspection:
1. From the Home screen, click the yellow button in the top center of the screen that displays the currently running inspection. This will display
all the stored inspections.
2. Select the inspection to start and click the Start Running button that appears below it.
Changing Inspection Name or ID
To change the name or ID of an inspection go to Main Menu > Inspection > Stored Inspections > Set Name/ID. Select the inspection from the list.
iVu Plus BCR Gen2 Series Sensor
P/N 178443 Rev. C
www.bannerengineering.com - Tel: +1-763-544-3164
11
