manualshive.com logo in svg

Banner DXMR90-X1 Series, Инструкция по эксплуатации

Поделиться
Скачать
Banner DXMR90-X1 Series Скачать руководство пользователя страница 52

May 09, 2023

 

DXMR90-X1 Series Controller Instruction Manual

 

 

52

•
•
•

DXM Security 

The DXM was designed to collect local wireless sensor data, local sensor data, provide simple control, and send the data to 
the cloud. 

The DXM does not run a Linux or Windows based operating system but an embedded real-time operating system (RTOS) 
environment. As a proprietary operating system, the security aspects are easier to manage and minimize. 

Security updates are released through the Banner Engineering Corp website (

www.bannerengineering.com

) and New Prod-

uct Release Announcements (

NPRA

). 

Warnings

WARNING:

Do not use this device for personnel protection

 

Using this device for personnel protection could result in serious injury or death.
This device does not include the self-checking redundant circuitry necessary to allow its use in 
personnel safety applications. A device failure or malfunction can cause either an energized (on) 
or de-energized (off) output condition.

IMPORTANT: 

Please download the complete 

DXMR90-X1 Series Controller

 technical documentation, 

available in multiple languages, from www.bannerengineering.com for details on the proper use, applica-
tions, Warnings, and installation instructions of this device. 

IMPORTANT: Por favor descargue desde www.bannerengineering.com toda la documentación técnica de 

los 

DXMR90-X1 Series Controller

, disponibles en múltiples idiomas, para detalles del uso adecuado, apli-

caciones, advertencias, y las instrucciones de instalación de estos dispositivos. 

IMPORTANT: 

Veuillez télécharger la documentation technique complète des DXMR90-X1 Series Con-

troller

 sur notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applica-

tions, les notes de sécurité et les instructions de montage. 

Install and properly ground a qualified surge suppressor when installing a remote antenna system.

 Remote antenna configu-

rations installed without surge suppressors invalidate the manufacturer's warranty. Keep the ground wire as short as possible 

and make all ground connections to a single-point ground system to ensure no ground loops are created. No surge suppres-
sor can absorb all lightning strikes; do not touch the Sure Cross® device or any equipment connected to the Sure Cross de-
vice during a thunderstorm.  

Exporting Sure Cross® Radios.

 It is our intent to fully comply with all national and regional regulations regarding radio fre-

quency emissions. Customers who want to re-export this product to a country other than that to which it was sold must en-

sure the device is approved in the destination country.

 The Sure Cross wireless products were certified for use in these coun-

tries using the antenna that ships with the product. When using other antennas, verify you are not exceeding the transmit 
power levels allowed by local governing agencies. This device has been designed to operate with the antennas listed on 

Banner Engineering’s website and having a maximum gain of 9 dBm. Antennas not included in this list or having a gain 

greater than 9 dBm are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To reduce 
potential radio interference to other users, the antenna type and its gain should be so chosen such that the equivalent 

isotropically radiated power (EIRP) is not more than that permitted for successful communication. Consult with Banner Engi-

neering Corp. if the destination country is not on this list.

 

© Banner Engineering Corp.

Содержание DXMR90-X1 Series
























































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды