Banner DXMR90-X1 Series, Инструкция по эксплуатации

Страница: 13 / 55

May 09, 2023
DXMR90-X1 Series Controller Instruction Manual
13
IMPORTANT: The DXMR90-X1 Series Controller comes preloaded with a default configuration XML file.
You can download the default XML on the product page for the DXMR90-X1 .
This quick start guide outlines the basic operations to set up a DXMR90-X1 using the configuration software. For a more
comprehensive explanation of features, refer to the DXM Configuration Software Instruction Manual (p/n 209933 ).
Configuring the DXMR90 Controller
This section will walk you through the method of setting up the DXM Configuration Software and communicating with a con-
nected DXM device. Version 4 of the DXM Configuration Software supports multiple DXM device models, each of which in-
corporates different features.
As soon as a DXM model is connected to your computer, the software automatically detects the correct model and loads the
appropriate screens. You may also manually select which model of DXM you are configuring if you intend to create a configu-
ration file without connecting a device. This ensures that the interface and the configuration file use the correct features.
Not all screens are available for all models. To change to another model of DXM, go to the Select Mode screen and use the
drop-down list to select another model. If the active configuration is incompatible with the selected model, you will be prompt-
ed to either proceed and wipe out the active configuration or cancel the model change and preserve the configuration.
Opening splash screen for Traditional Setup mode
When the Select DXM Model drop-down is set to DXMR90-X1 , a new network discovery table is displayed. Click Scan Net-
work for DXMs to detect DXM devices on the host computer's network. Discovered DXMs are listed in the network discovery
table. Double-click any row entry to connect to that DXM. If the DXM's IP address is already known, the standard TCP con-
nection option is available below the network discovery table.
IMPORTANT: Any model of DXM may connect to the configuration software regardless of which device
model is selected in the configuration software. Compatibility is checked before configuration files are up-
loaded to the device.
The local registers are the main global pool of registers that are defined by the user to store data within the DXM. The local
registers are listed on the Local Registers › Local Registers in Use screen.
The bottom status bar displays the communications status, application status, and the DXM Configuration Software version.
In this short example, we will configure the DXM to read six registers on an external Modbus server device and save the data
into the local registers.
Configuration Example: Reading Registers on a Modbus Slave Device
© Banner Engineering Corp.