8.10 Warnings
Install and properly ground a qualified surge suppressor when installing a remote antenna system.
Remote antenna
configurations installed without surge suppressors invalidate the manufacturer's warranty. Keep the ground wire as short as
possible and make all ground connections to a single-point ground system to ensure no ground loops are created. No surge
suppressor can absorb all lightning strikes; do not touch the Sure Cross
®
device or any equipment connected to the Sure
Cross device during a thunderstorm.
Exporting Sure Cross
®
Radios.
It is our intent to fully comply with all national and regional regulations regarding radio
frequency emissions.
Customers who want to re-export this product to a country other than that to which it was sold
must ensure the device is approved in the destination country.
The Sure Cross wireless products were certified for use
in these countries using the antenna that ships with the product. When using other antennas, verify you are not exceeding
the transmit power levels allowed by local governing agencies. This device has been designed to operate with the antennas
listed on Banner Engineering’s website and having a maximum gain of 9 dBm. Antennas not included in this list or having a
gain greater that 9 dBm are strictly prohibited for use with this device. The required antenna impedance is 50 ohms. To
reduce potential radio interference to other users, the antenna type and its gain should be so chosen such that the equivalent
isotropically radiated power (EIRP) is not more than that permitted for successful communication. Consult with Banner
Engineering Corp. if the destination country is not on this list.
Important:
Please download the complete DXM100-Sx Modbus Slave technical documentation, available
in multiple languages, from www.bannerengineering.com for details on the proper use, applications,
Warnings, and installation instructions of this device.
Important:
Por favor descargue desde www.bannerengineering.com toda la documentación técnica de los
DXM100-Sx Modbus Slave, disponibles en múltiples idiomas, para detalles del uso adecuado,
aplicaciones, advertencias, y las instrucciones de instalación de estos dispositivos.
Important:
Veuillez télécharger la documentation technique complète des DXM100-Sx Modbus Slave sur
notre site www.bannerengineering.com pour les détails sur leur utilisation correcte, les applications, les
notes de sécurité et les instructions de montage.
WARNING:
•
Do not use this device for personnel protection
•
Using this device for personnel protection could result in serious injury or death.
•
This device does not include the self-checking redundant circuitry necessary to allow its use in
personnel safety applications. A device failure or malfunction can cause either an energized (on)
or de-energized (off) output condition.
Important:
•
Never operate a 1 Watt radio without connecting an antenna
•
Operating 1 Watt radios without an antenna connected will damage the radio circuitry.
•
To avoid damaging the radio circuitry, never apply power to a Sure Cross
®
Performance or Sure
Cross MultiHop (1 Watt) radio without an antenna connected.
Important:
•
Electrostatic discharge (ESD) sensitive device
•
ESD can damage the device. Damage from inappropriate handling is not covered by warranty.
•
Use proper handling procedures to prevent ESD damage. Proper handling procedures include
leaving devices in their anti-static packaging until ready for use; wearing anti-static wrist straps; and
assembling units on a grounded, static-dissipative surface.
8.11 Banner Engineering Corp Limited Warranty
Banner Engineering Corp. warrants its products to be free from defects in material and workmanship for one year following
the date of shipment. Banner Engineering Corp. will repair or replace, free of charge, any product of its manufacture which, at
the time it is returned to the factory, is found to have been defective during the warranty period. This warranty does not cover
damage or liability for misuse, abuse, or the improper application or installation of the Banner product.
Sure Cross
®
DXM100-Sx Wireless Modbus Slave
42
www.bannerengineering.com - Tel: + 1 888 373 6767
