manualshive.com logo in svg

Banner D10 Series, Руководство пользователя, Страница: 51 / 64

Поделиться
Скачать
Banner D10 Series Скачать руководство пользователя страница 51

Datasheet

Advanced sensor with dual displays for use with plastic fiber optics

•

Easy-to-read 8-segment light bar indicator for teach and signal strength

readout, plus indicators for continuous readout of operating status (user

configuration)

•

Easy-to-set automatic Expert-style configuration options include Static and

Dynamic TEACH, and Window SET, plus manual adjustment for fine tuning

•

Smart gain-control algorithm to maximize performance in low-contrast

applications

•

Fast 500-microsecond sensing response with improved crosstalk avoidance

routine (for two sensors) in Normal mode

•

Selectable high-speed (HS) mode option for 200-µs response

•

Extreme configuration flexibility via push buttons or a remote input wire

•

Easy selection of Light/Dark Operate (LO/DO), 30 ms pulse stretcher (OFF-

delay), and response speed, via push buttons or a remote input wire

•

Models available with visible red (680 nm) or visible green (525 nm) sensing

beam

•

Sleek, ultra-slim 10 mm housing, mounts to a standard 35 mm DIN rail

•

Models with bussable power provide simplified wiring of up to 16 sensors and

feature improved temperature compensation for side-by-side mounting

WARNING: Not To Be Used for Personnel Protection

Never use this device as a sensing device for personnel protection. Doing so could lead to

serious injury or death. This device does not include the self-checking redundant circuitry necessary

to allow its use in personnel safety applications. A sensor failure or malfunction can cause either an

energized or de-energized sensor output condition.

Models

Red Beam Models

Green Beam Models

Description

Cable1

Outputs

D10BFP

D10BFPG

Standard sensor

2 m (6.5 ft) Cable

Bipolar NPN/PNP

D10BFPQ

D10BFPGQ

6-pin Pico-style QD

Models with Bussable Power

D10B5FP

-

Main unit

2 m (6.5 ft) Cable

Bipolar NPN/PNP

D10B2PFP

-

Sub-unit

2 m (6.5 ft) Cable

Single PNP

D10B2NFP

-

2 m (6.5 ft) Cable

Single NPN

Overview

The D10 Expert

™

 is an easy-to-use, DIN-rail-mountable fiber optic sensor. It provides high-performance sensing in low-

contrast applications. Configuration options include Setup mode plus Static and Dynamic TEACH, and Window Set options,

in addition to manual fine adjustment, remote programming, and security push button lockout.

1 To order the 9 m (30 ft) cable model, add the suffix "W/30" to the cabled model number. For example, D10xFP W/30. Models

with a quick disconnect require a mating cordset. See Accessories.

D10 Expert

™

 Series with Bar Graph Display

and Discrete Output

 

 

Original Document

117830 Rev. G

14 November 2016

117830

Содержание D10 Series

































































Отзывы:

Нет отзывов