D10
Expert
™
Dual Discrete Outputs
4
P/N 64154 rev. F
Banner Engineering Corp.
•
Minneapolis, MN U.S.A.
www.bannerengineering.com • Tel: 763.544.3164
Push Button
Remote
0.04 sec. ≤ T ≤ 0.8 sec.
Result
Access
Static
TEACH
Mode
• Press and
hold Static (-)
button > 2
seconds.
• No action required;
sensor is automatically
ready for 1st TEACH condition.
• Display flashes “
1st
”
• Arrow icon turns red
TEACH
Output
O
N
Condition
• Present Output
ON condition.
• Click Static
button.
• Present Output ON
condition.
• Single-pulse the
remote line.
• Display flashes “
2nd
”
TEACH
Output
OFF
Condition
• Present Output
OFF condition.
• Click Static
button.
• Present Output OFF
condition.
• Single-pulse the
remote line.
TEACH conditions acceptable:
• Display flashes “
pass
,” followed
by a number (denoting contrast);
see Figure 3.
• Sensor returns to RUN mode with
new settings.
• Arrow icon turns green
TEACH conditions unacceptable:
• Display flashes “
fail
” and
returns to “
1st
”
• Arrow icon remains red
• After 60 seconds, sensor returns
to RUN mode (Arrow icon
turns green) without changing
settings.
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
T
dynamic
static
dynamic
static
dynamic
static
dynamic
static
dynamic
static
Two-Point Static TEACH (Threshold)
• Establishes a single switching threshold
• Threshold position is adjustable using “+” and “-” buttons (see Manual Adjust, page 9)
Static TEACH is the traditional setup method, used when two conditions can be presented
by the user. The sensor locates a single sensing threshold (the switchpoint) midway between
the two taught conditions, with the Output ON condition on one side, and the Output OFF
condition on the other (see Figure 2).
The first condition taught is the ON condition. The Output ON and OFF conditions can be
reversed by changing Light/Dark Operate status in SETUP mode (see page 10).
Static TEACH and Manual Adjust
Using Manual Adjust with Static TEACH moves the switching threshold.
Sensor positions
threshold midway
between taught conditions
Sensor positions
threshold midway
between taught conditions
Darkest
(no signal)
Darkest
(no signal)
Most Light
(saturated
signal)
Most Light
(saturated
signal)
Single
sensing
condition
Sensing window size
adjusted by
Manual Adjust
Output OFF
Output OFF
Output OFF
Output ON
Output ON
Darkest Taught
Condition
Lightest Taught
Condition
Position
adjusted by
Manual Adjust
Darkest
(no signal)
Most Light
(saturated
signal)
Output OFF
Output ON
2nd Taught
Condition
1st Taught
Condition
Position
adjusted by
Manual Adjust
Figure 2. Static TEACH (Light Operate
shown)
Contrast Values
500+
Excellent:
Very stable operation.
100-500
Good:
Minor sensing variables will
not affect sensing reliability.
32-99
Low:
Minor sensing variables may
affect sensing reliability.
0-31
Marginal:
Consider an alternate
sensing scheme.
Figure 3. Contrast Values
