18
97282 v.3.0
17.
Re-install the block off plate
mounting nuts onto the studs from
the inside of the cab. Then carefully
pull the remaining free length of the
Derringer Starter Cable through the
firewall. Be sure to leave a little slack
on the engine bay side of the firewall.
18.
For the jeep Grand Cherokee,
route the smaller connector fo the
Derringer Starter Cable through
the EOM grommet (behind the
brake pedal) from the engine-side
of the firewall. See
Figure 18
Feed
a straightened metal coat hanger
through the firewall from the inside of
the vehicle and then attach the wire to
it. Then gently pull them back through
the firewall. The EOM grommet may
need to be cut to create extra room
for the additional wires. Take care to
not pinch or trap any wires.
19.
Plug the OBDII cable into the
OBDII port under the dash
Figure 19
.
Figure 18
Figure 19
Grand Cherokee
