Banks Outdoors FEEDBANK 40, Инструкция по эксплуатации

Страница: 13 / 16

WWW.BANKSOUTDOORS.COM 13
WILD WATER® 300
1. Set your troughs on level ground.
2. Set your tank on level ground over the top of the troughs.
3. Install the 2 float valves to the outlet holes on the Wild Water tank.
4. Fill the tank through the 2” hole.
5. After the tank is full, insert the 2” plug into the fill hole.
6. Allow water to fill into the trough until it automatically shuts itself
off. Water should not overflow the troughs. If water does proceed over
the top of the troughs, verfiy that the troughs are level.
7. Install the 2 float valve protection covers with the (8) 1 3/4” bolts.
INCLUDED PARTS:
(2) 3’ Trough (s)
(1) 2” Plug
(2) Float Valve Protection Covers
(1) 300 Gallon Tank
(2) Float Valves
(8) 1 3/4” Cover Bolts