CAUTION & INSTRUCTION:
Before beginning a workout session ensure Safety Key is properly
attached onto the Console and Safety Clip is securely attached to an
article of your clothing. Always begin treadmill standing on the side rails
not on the running belt. Allow the treadmill to reach a speed of at least
1.0km/h, before walking on the running belt.
1.
Ensure this treadmill is plugged into 220 voltage which has a grounding plug.
2. Press the Power Switch located at the front of the treadmill to the ON position,
press “START” key, the machine will slow start.
3. On standby or running time, catch both side of heart inductor, the console
screen will show data of heart frequency. It will not show the data when catch just
one side.
4. Pull off Safety Key for any emergency situation. The machine will stop
automatically after pull off Safety Key.
FOLDING UP & UNFOLDING
NOTE : Ensure that the Power Switch is in the OFF position and the power
cord is unplugged from the electrical outlet.
FOLDING UP :
UNFOLDING :
Hold the rear end with one hand and then lift the deck up until the steel ball pops
into the locked position.
Note: Check the Cylinder ‘ pops’ down into the locked position before
moving the treadmill.
Hold the rear end with one hand and then pull the cylinder to unfold the treadmill.
Do not stand under the deck when unfolding the treadmill.
TO PREVENT ANY INJURY PLEASE MAKE SURE YOU HAVE A FIRM HOLD
WHEN LIFTING UP OR SETTING DOWN THE DECK.
7
