The display on the recorder informs you
about the current status of the recorder.
It tells you if you are replaying an ongoing
program, if there are timed recordings
waiting to be executed, and if a recording is
in progress.
If two recordings overlap or if a recording can
not be executed, this is indicated as well.
TIMER
Indicates that a timed recording has been
programmed into the recorder.
TIMER remains on during standby, and flashes if a
timer recording can not be executed.
RECORD
‘Recording in progress’ indication.
RECORD flashes if a manual recording can not be
executed for some reason – for example, if there
is a conflict with a timed recording.
REPLAY
The hard disc recorder allows you to ‘pause’ the
current programme if, for example, you wish to
take a short break, and replay the programme
later. REPLAY indicates that the current source,
such as V.TUNER, is being replayed from the two-
hour buffer on the hard drive.
For further information about how to replay an
ongoing program, refer to the chapter ‘Pause and
replay an ongoing program’ on page 10.
•
(Standby indicator)
The indicator shines red when you switch off the
recorder. The indicator shines green when the
recorder is in use. The indicator fl ashes red and
green if the recorder is overheating. This is
described in detail on page 41.
The hard disc recorder switches itself to standby
automatically if you have not operated the hard
disc recorder for at least 30 minutes.
>> Introducing HDR 1
TIMER
RECORD
REPLAY
6
*NOTE! On some Beo4 remote controls, the
V MEM button is called VTAPE.
Содержание HDR 1
