Bang & Olufsen DVD 2, Руководство пользователя

Страница: 50 / 64

First-time setup
The setup menu will appear the very first time
you switch on this DVD player. The settings in
the menu will help you set up the features of
the DVD player easily, including television
channel installation, language settings and
the GUIDE Plus+ system.
> Press DVD on the remote control to switch on
the DVD player.
> LANGUAGE AND COUNTRY menu will appear
on the television.
If your DVD player is registered as V MEM* or
V.AUX2 and not as DVD, you must choose V MEM
or V.AUX2 instead of DVD.
IMPORTANT!
Complete the settings for the first-time setup
before inserting a disc for playback or recording.
The disc tray will not open until the basic setup is
completed.
The TV programme listings do not appear on the
GUIDE Plus+ system as soon as you complete the
basic installation. It may take up to 24 hours to
receive TV listings data.
The setup procedure described here is
activated when your DVD player is
connected to the mains supply and
switched on for the first time. You are
then led through an automatic series
of on-screen menus in which you must
make the required settings. After
completing the first-time setup, you
must set up the GUIDE Plus+ system.
Make sure you have successfully
made all the required connections to
this DVD player, the television and
Satellite Receiver/Cable Box (if any)
and switched them on. The channel
search will detect the signals and
save all the available channels.
Set up the DVD player
LANGUAGE AND COUNTRY
TV FORMAT
CHANNEL SEARCH
TIME AND DATE
GUIDE PLUS+ SYSTEM
CONTINUE
DO NOT INSTALL NOW
50
*NOTE! On some Beo4 remote controls, the V MEM
button is called V TAPE.