Bang & Olufsen DVD 2, Руководство пользователя

Страница: 12 / 64

Play discs
If your DVD player is registered as
DVD, playback starts automatically,
when you load a disc. If your DVD
player is registered as V MEM you
must activate playback yourself.
While playing a DVD disc, use the
Beo4 remote control to search at
varying speeds, step through the disc
or bring up a DVD disc menu. You
can resume playback of a DVD disc
where you stopped last time.
While playing a CD disc, you can
pause playback, switch to a new
track or select a track by its number.
Note: The DVD player is set for region 2 from
the factory. Discs from other regions will not
play on the DVD player as long as it is set for
region 2. If you need to have the region
changed, contact your retailer. Some discs can
not be played on the DVD player due to the
configuration, condition of recording or
characteristics of the disc.
When playing a disc you have the possibility
to change chapters or tracks, pause and stop
the disc and play it back in slow motion.
Play and change chapters or
tracks on a disc
Load a DVD or CD disc and press
GO then the red button to start
playing the disc, or …
… load a DVD or CD disc and
press GO then 0 to bring up the
main menu
Then press to highlight DVD
then GO to start playing the disc
Press to step between titles,
chapters or tracks
Press repeatedly to move to
another title, chapter or track on
the disc
Enter the title, chapter or track
number
Press GO then 8 to change
between chapter step and title
step
Press GO then 7 to move back in
a chapter or title on the disc
Press GO then 9 to move
forward in a chapter or title on
the disc
Press to wind backwards or
forwards during playback of a
DVD disc. Press again to change
speed
Press STOP to stop winding and
GO to resume playback
Pause, slow or stop a disc
Press to pause playback
Press and hold to start slow
playback. Press again to change
speed
Press again to stop playback
completely, or …
… press to resume playback
During playback of a disc
GO
GO
0
GO
0 – 9
GO
8
GO
7
GO
9
STOP
GO
STOP
STOP
GO
12
NOTE! The factory setting for moving back and
forward is five minutes. To change this interval,
refer to page 55 in the chapter
‘Adjust the system
setup‘ .