Bang & Olufsen DVD 2, Руководство пользователя

Страница: 5 / 64

Record programmes
The DVD player gives you the opportunity to
record and store television, satellite (DTV*) and
set-top box programmes on the hard disc.
You decide whether to store them temporarily or
permanently. The instant and timed recordings
you make are stored in HARD DISC CONTENT, and
the on-going programmes you pause and replay
are put temporarily in a six-hour Replay buffer. If
you wish, you can move saved programmes from
the buffer to the HARD DISC CONTENT. You can
also record the programmes stored on the hard
disc on a DVD disc.
With this DVD player, you do not have to clutter up
your home with piles of video tapes. You can store
your recordings on the hard disc and bring up an
overview of recordings on your television screen
at any time.
In order to ensure that recordings are not deleted
from the hard disc, you can protect them from
automatic deletion. Refer to ‘Protect a recording’
on page 28.
The close-up operation panel
> Press the load button to open or close the
loader.
To load a disc …
Press on the front of the top panel to get access
to the close-up operation panel.
> Press the load button on the close-up operation
panel. The loader slides out.
> Place a disc in the loader.
When switched on from standby, the DVD player
takes up to 40 seconds to start up.
The status display …
The status display to the right shows the elapsed
playing time of a DVD disc or a recording or the
current track number being played on an audio
CD. Switching DVD chapters causes the appropriate
chapter number to be shown in the display for a
few seconds.
The indicator light …
The DVD player has an indicator light on the right
side of the front panel, which shows its different
modes.
ORANGE … The DVD player is recording. When
the DVD player receives a record command the
orange colour flashes on and off for some
seconds before switching to constant orange.
While the light indicator flashes on and off the
DVD player searches for a matching signal, and
you can not switch channel until the signal is
found. If you do so, the DVD player will not
record the programme you wish to record.
GREEN … The DVD player is on, but not recording.
RED … The DVD player is in standby.
5
Loader
Load button
Status display
Indicator light