ID
IIC1
IIC2
IIC3
D
J/
DG
Z
IC9702
IC9009
IC9019
IC9151
IC9605
IC9709
IC1001
IC3003
IC3004
OK H21
OK H61
OK H62
OK H53
IC9305
- - -
IC9455
OK H55
OK H56
OK H52
IC2401
OK H54
OK H51
OK H63
OK H64
IC3005
IC3006
OK H65
OK H66
+
+
_
VOL
R
1
2
3
PDP self-check
The self-check checks the status of the circuits connected to the IIC bus
When the PDP is fitted an aluminium front frame, point the NN remote control at
the hole in the left-hand front bottom side of the PDP. See
6.
By means of a thin tool press in the holes FD the FE and then FF on the NN remote
control.
For other operations point the NN remote in the same way.
-
Refer to illustrations for:
- Placement of black self-adhesive tape on the PDP.
- Placement of buttons on NN remote control.
-
Remove the black self-adhesive tape on the PDP. See
1.
-
Switch on the PDP.
-
Enter self-check mode.
Press button
"B"
on the PDP and at the same time button
OFF TIMER
on the
remote control. See
1 and
2.
The display will show “:-”, while the self-check is performed.
-
Result of self-check. See
3.
“OK”
No fault
“- -”
Fault in or missing circuit
-
Exit self-check mode.
Press
“Standby”
on NN remote control and thereafter press
Standby
on Beo4.
-
Mount the black self-adhesive tape on the PDP.
1.8 PDP self-check, English
LED
B
Standby
OFF TIMER
6
FD
FE
FF
Содержание D6
