enter the code and press the
centre
button to confirm.
3. If you select
Off
, enter your four-digit pin code and press the
centre
button to
save.
If you inadvertently press a wrong button while entering a code, press the
yellow
button
to delete a digit or press the
red
button to clear an input field.
Change your pin code
You can change your pin code at all times. If the pin code system is already activated,
you are prompted to enter your pin code when you bring up the
Pin code
menu.
Change the pin code ...
1. In the
Pin code
, menu select
New pin code
.
2. Enter your pin code and press the
centre
button.
3. Enter a new four-digit pin code, then press the
centre
button.
4. Re-enter the new pin code and press the
centre
button to confirm.
If you inadvertently press a wrong button while entering a code, you can select
Clear
to
clear the input field.
If you change your pin code more than five times within a three-hour period, the
Pin
code
menu becomes inaccessible for three hours, provided that the television is not
disconnected from the mains. Disconnecting the television resets the three-hour period.
Switch Off Timer
In the
Switch Off Timer
menu, you can set the television to switch off automatically after
some time without operation. The factory setting is 4 hours. This function only applies in
video mode, not in audio mode.
Settings
General settings
Switch Off Timer
...
When
Switch Off Timer
is activated, a message appears on your TV screen if the
television has not been operated during the time set in the menu. The television then
switches to standby if you do not operate it.
When no source signal has been detected for 10 minutes, the television may switch to
standby.
Advanced settings
Make advanced settings
Make advanced settings for the TV guide and HbbTV feature.
Settings
General settings
Advanced
...
61
Содержание beovision 14-40
Страница 1: ......