Connections
Connection of products
The connection panel on your television allows you to connect signal input cables as
well as a variety of extra products, such as a Blu-ray player or a music system.
Products you connect to these sockets can be registered in the Source list menu. For
more information, press the red button in the on-screen help and find '
'.
The illustration shows an example of connections to the
AERIAL
,
SAT 1-2
and
PL1-4
sockets.
Before you connect any products to your television, remember to disconnect the
television from the mains. Except when connecting a source to an HDMI IN or USB
socket.
Depending on the type of product you connect to the television, different cables and
maybe also adaptors are needed. Cables and adaptors are available from your Bang &
Olufsen retailer.
Tuner
If you use the hard disk recorder functions in connection with a satellite dish, you must
use an LNB head with two outputs. If you have more than one satellite dish, you must
also use a multi DISEqC switch. For more information, contact your Bang & Olufsen
retailer.
Loudspeakers
Use Bang & Olufsen BeoLab speakers. Cables are available from your Bang & Olufsen
retailer.
You can also connect up to eight speakers wirelessly. For more information, press the
red
button in the on-screen help and find '
To obtain the best possible wireless connection, it is recommended to place all wireless
speakers within a range of approximately 9 metres (29.5 ft) from the television.
Do not place any obstacles in front of the television or wireless speakers as this may
interfere with the wireless connection. The wireless speakers should be placed in one
room and be visible from the television. See the guide for your speaker for information
about whether or not your speaker can be connected wirelessly.
Products with HDMI™ output
Products with HDMI output such as a set-top box can be connected to any available
HDMI IN socket in the television. For more information on how to set up connected
products, press the
red
button in the on-screen help and find '
'.
A configured source can be selected on the BeoRemote One or via
TV
in the Home
menu.
Connected products can be operated with its own remote control or you may download
a Peripheral Unit Controller (PUC) table, if available, to use the Bang & Olufsen remote
control. For more information, press the
red
button in the on-screen help and find '
15
Содержание beovision 14-40
Страница 1: ......