Bang & Olufsen BeoTalk 1100, Руководство пользователя

Страница: 40 / 46

40
Symptom
The answering machine function cannot be
activated.
Silent Answer cannot be connected.
During an incoming call a beep is heard from a
parallel telephone even if the Silent Answer has
been connected.
A new number is shown in the display, but the
telephone does not ring.
Somebody cannot call you.
Phone numbers from the Caller ID list which are
followed by – cannot be called using the Call
Return button.
The display is illuminated although all messages
have been played.
is shown in the display and the display is
illuminated.
BeoTalk 1100 answers the call sooner than the
pre programmed ringing time.
The phone rings even if the Silent Answer has
been connected.
Possible cause
No announcement has been recorded for the
chosen type of announcement.
The answering function has not been
connected.
Technical limitations on certain exchanges.
• Silent Answer has been connected.
• Rejection of incoming calls has been activated.
The number exists in the Rejection list, and the
function has been activated.
Due to technical limitations.
New information received (Caller ID or messages).
• BeoTalk 1100 has not been connected to the
telephone plug.
• A telephone is off-hook.
New information received, and at the same time
the Rate saver has been activated.
You do not subscribe to the Caller ID
service.
Possible correction
Record an announcement and activate the
announcement type.
Connect the answering function.
When BeoTalk 1100 displays the clock:
Press
+ 01 + . Connect Silent Answer and make a
call in order to check if it is possible to enter a
message. If it is impossible, then reset BeoTalk
1100 to the first setting by pressing
+ 01 + .
Check again.
Scroll through the Caller ID list or play messages.
• Connect BeoTalk 1100 to the telephone plug.
• Replace the handset.
Worth knowing – about problem-solving