Bang & Olufsen BeoSystem 1, Руководство пользователя

Страница: 10 / 52

If your VCR has an automatic standby feature that
switches the VCR off when playback has been
paused or stopped for a period of time, you can
reactivate the VCR by pressing another source
button on Beo4, such as TV, followed by V TAPE.
10
With Beo4, you can switch on and
operate a VCR you have connected to
BeoSystem 1 and registered in the
EXTERNAL SOURCES menu*. All
playback, wind, and stop functions
can be operated with Beo4. Eject a
video cassette via the close-up
operation panel on the VCR.
A set of functions available for your
VCR can be seen on a menu overlay
that you call up on the screen. You
can then operate these functions via
Beo4.
With BeoSystem 1 and Beo4, you can
make an instant recording of any
source you choose.
A timed recording must either be
preset via on-screen guides available
with the source you wish to record
from, or via the VCR’s own menus. In
the second case, the VCR’s own
remote control must be used. The
Record lock function can help ensure
that a signal is available between the
source and the VCR when the timed
recording is preset to take place.
Using a Video Cassette Recorder via Beo4
Switching on and using a VCR
You can switch on your VCR, start and stop
playback and search through a tape via a
direct button on Beo4.
Press to switch on your VCR
directly and start playback
Rewind or fast forward through
the cassette
Press to pause playback
Press to resume playback, or…
…press to stop playback
completely
Switch the BeoSystem 1 and the
VCR to standby
V TAPE
ss tt
STOP
GO
STOP
•
Selected VCR functions
Selected functions offered by your VCR can be
operated via Beo4 and the menu overlay for
your VCR. Call up the menu to see a list of the
Beo4 buttons that activate VCR functions and
services. The buttons described below apply to
all VCRs, but the functions activated will vary.
Press to switch on your VCR
Press to call up the menu overlay
Press a coloured button on Beo4
to activate a specific function
shown in the menu overlay
Press the number keys indicated
in the menu to call up the
specific function or service
In menus or services…
Move a cursor up or down, left
or right in the desired direction
or to the desired option
Use the number keys to enter
information in menus or services
when relevant
Press to select a menu option
Press to return to VCR viewing
V TAPE
MENU
0 – 9
▲
▼
ss tt
0 – 9
GO
EXIT
*NOTE! Please refer to Register equipment
connected to BeoSystem 1 for information about
registering equipment in the EXTERNAL SOURCES
menu.