Alternative Setup
26
Alternative setup
‘Band on the wall’ without BeoSound Core
It is possible to use the BeoSound Shape without a BeoSound Core. But you will still need to load the filter settings using a BeoSound Core. Be
aware that amplifiers cannot get firmware update without connection to a BeoSound Core.
If you want to use BeoSound Shape and ‘Band on the wall’ without a BeoSound Core, but with a Moment instead, you have to connect a
BeoSound Core to the setup to load the Design ID.
When the filters are applied, and all speakers are tested, you can now disconnect the USB and Optical cable, and replace them with a Power Link
cable from the BeoSound Moment instead. If the BeoSound Shape is not mentioned in the speaker menu, use BeoLab 17.
Amplifier Master
BeoSound Core
Speaker tile
Amplifier Slave
Optical
USB A > B
Speaker cable(s)
up to 4 per amplifier
COMM IN/OUT
UP
Speaker cable(s)
up to 4 per amplifier
UP
UP
UP
Amplifier Master
Speaker tile
Amplifier Slave
Power Link
Speaker cable(s)
up to 4 per amplifier
COMM IN/OUT
UP
Speaker cable(s)
up to 4 per amplifier
UP
UP
