
Exchange of software EEPROM on PCB3
When exchanging the EEPROM on PCB3, the data from the micro-processor will be
written into the EEPROM when selecting any source e.g. RADIO.
It is possible to borrow an EEPROM from another BeoSound 3000 to test if there is
suspicion of a fault in the original EEPROM. The EEPROM will always adopt the
data from the main micro-processor.
Exchange of both micro-processor module PCB3 and software EEPROM on PCB3
If both the micro-processor and the EEPROM need to be exchanged it is necessary
to have them pre-programmed from Bang & Olufsen with the correct serial number,
otherwise they will not work.
Please contact Bang & Olufsen.
5.16 Service- and pin code, English
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK