
TM (test mode) names/function for adjustments and service
Tuner test modes
TM 01: Automatic offset-adjustment for FM
TM 02: Manual offset-adjustment for FM
TM 03: Status for offset-adjustment
TM 04: Variant status
TM 06: Check RDS name
TM 07: Setting up of tuner variant
Master test modes
TM 20: Test of display functions
TM 21: Open ML-out
TM 22: Test of keyboard functions
TM 23: Software version
TM 24: Service operation counter
TM 25: Open ML-in
TM 27: Service of error detection
TM 28: Validity test for ROM/RAM/EEPROM
TM 32: Read-out of product ID
TM 34: Read-out of options
TM 35: Power down ON
TM 36: Power down OFF
CD test modes
TM 61: Focus on
TM 62: Focus off
TM 63: Starts turntable motor
TM 64: Stops turntable motor
TM 65: Light pen to outermost position
TM 66: Light pen to the innermost position
TM 67: Starts CD
TM 68: Stops CD
Test mode activating
Wait 20 - 30 sec. after connecting to mains.
By means of keyboard from St.by mode: Press
SOUND 0 2 5 8
with no more than
2 sec. between the individual enterings.
By means of remote control from St.by (can only be done if the product is not in
option 0) :
Press
SHIFT 9 0 2 5 8
with only 2 sec. between.
The remote control has to be in RADIO or CD option.
In TM the tuner is fully functional and may overwrite the display but the TM will
continue.
Deactivating
Press
•
and the display shows “TM OFF” or disconnect from mains.
Testmodes, English 5.1
ABO-CENTER
v/HENRIKSENS
ELEKTRONIK