Terminology - Interfaces 10
BeoLink App on a hand held device.
Via iOS based devices using the BeoLink App. Note that the device must access the same
home router/AP as the BeoLink Gateway is connected to.
TV overlay
Via Network Link based TVs, using a remote control:
- BeoRemote One: Add HOME CONTROL to the TV LIST. It is
recommended to keep the HOME CONTROL as one of the
top positions in the displayed for easy accessibility.
- Beo4 (Type 1710 or newer and with Database 1.30: check
by your Bang & Olufsen retailer). Add HOME CONTROL to
the TV LIST.
It is recommended to keep the HOME CONTROL as one of
the top positions in the displayed for easy accessibility.
- Beo4 (Type 1710 and newer; with old FirmWare). Add
RETURN to LIST (Stby+LIST, then press <Centre> and select
AV? using <Centre up> and press <Centre>, then select
REMOTE using <Centre up> and press <Centre>, and
ADDED is shown to confirm selection. Press and hold BACK
to leave setup.
It is recommended to keep the HOME CONTROL as one of
the top positions in the displayed for easy accessibility.
Network source
Network source is a source selected from another Network Link product (borrowed source).
ZONES
FLOOR1/CINEMA
FLOOR1/KITCHEN
FLOOR1/LIVING ROOM
FLOOR2/BATH ROOM
FLOOR2/CHILD ROOM
FLOOR2/SLEEPING ROOM
SCENES
CINEMA ON
CINEMA OFF
LIGHT ON
LIGHT OFF
CINEMA LIGHT
ROOM OFF
LEAVE
ZONES
CINEMA
KITCHEN
LIVING ROOM
BATH ROOM
CHILD ROOM
SLEEPING ROOM
CINEMA
FLOOR 1
FLOOR 1
FLOOR 1
FLOOR 1
FLOOR 2
FLOOR 2
FLOOR 2
CINEMA ON
CINEMA OFF
LIGHT ON
LIGHT OFF
CINEMA LIGHT
ROOM OFF
LEAVE
xxx