Set up the loudspeakers
We recommend that you follow
this procedure when you set up
the loudspeakers:
– Disconnect your system from the
mains supply.
– Connect your loudspeakers and set
the switch marked LINE–RIGHT–LEFT
on each loudspeaker as explained in
‘Cable connections’
(pp. 6–7).
– Set the switch marked FREE–WALL–
CORNER to the correct setting on
each loudspeaker. This is explained
in
‘Adapt the loudspeakers to your
room’
(pp. 8–9).
– Connect your entire system to the
mains supply again.
Cautions
– Make sure that the loudspeakers are placed
and connected in accordance with the
instructions in this Guide. To prevent injury,
use Bang & Olufsen approved stands and
wall brackets only!
– The loudspeakers can only be switched off
completely by disconnecting them from the
mains supply. Therefore, connect the loud-
speakers to an easily accessible wall socket.
– Do not attempt to open the loudspeakers.
Leave such operations to qualified service
personnel!
– The loudspeakers are designed for indoor use
in dry, domestic environments only, and for
use within a temperature range of 10–40º C
(50–105º F).
– For optimum sound quality, do not place the
loudspeakers enclosed in a small space, and
never place anything directly in front of the
loudspeakers.
– Place the loudspeakers with the front facing
your favourite listening position.
5
The loudspeakers must be placed standing
upright on the base on a firm and level surface.
Содержание BeoLab 9
Страница 1: ...BeoLab 9 Guide ...
Страница 12: ...www bang olufsen com ...