Bang & Olufsen BeoLab 9 Скачать руководство пользователя страница 11 | Manualshive

Страница: 11 / 12

Bang & Olufsen BeoLab 9 Скачать руководство пользователя страница 11

This product fulfils the conditions

stated in the EEU directives
89/336 and 73/23.

For the US-market only!

NOTE: This equipment has been tested and
found to comply with the limits for a class B
digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide
reasonable protection against harmful
interference in a residential installation.

This equipment generates, uses and can

radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference

to radio communications. However, there is no
guarantee that interference will not occur in a

particular installation. If this equipment does
cause harmful interference to radio or

television reception, which can be determined

by turning the equipment off and on, the user
is encouraged to try to correct the interference
by one or more of the following measures:

– Reorient or relocate the receiving antenna.
– Increase the separation between the

equipment and receiver.

– Connect the equipment into an outlet on a

circuit different from that to which the
receiver is connected.

– Consult the retailer or an experienced

radio/TV technician for help.

For the Canadian market only!

This class B digital apparatus meets all

requirements of the Canadian Interference-
Causing Equipment Regulations.

«
...
9
10
11
12
»

Содержание BeoLab 9













Отзывы:

Нет отзывов