Bang & Olufsen BeoCenter 2 MK II, Руководство по обслуживанию

Страница: 16 / 68

3.6 Service menu
49 ATI NO TX ALLOWED
EP 1 = 00 Av Panel or Connection between Socket
Unit and Test equipment
EP 1 = 01 Av Panel, Top Interface, or interface cable
(connection or cable)
4A ATI TLG WAS BREAK SYNCHED
EP 1 = 00 Av Panel or Connection between Socket
Unit and Test equipment
EP 1 = 01 Av Panel, Top Interface, or interface cable
(connection or cable)
4B WRITING_TO_EEPROM BEFORE_INIT SW bug, check for AP SW update
F8
APPLICATION ERROR
00 NO APPLICATION ERROR No error
01 ILLEGAL TOP FEP TELEGRAM SW bug, check for Master Unit/AP SW
update
02 INVALID KEY EVENT SW bug, check for Master Unit SW
update
0A ILLEGAL TIMER CONTROL SW bug, check for AP SW update
10 POWER FAIL 50MS Power disconnected while BC2 not in
stanby, or SMPS
11 POWER FAIL 100MS Power disconnected while BC2 not in
stanby, or SMPS
20 TRANSMISSION BUFFER TIMEOUT SW bug, check for Socket Unit SW
update
21 ILLEGAL PORT VALUE Test equipment used wrong port value
30 TUNER ERROR
EP 1 = 02 RDS COMPONENT (IC402) AM/FM Tuner
EP 1 = 03 TUNER COMPONENT (IC200)) AM/FM Tuner
EP 1 = 04 PLL COMPONENT (IC200)) AM/FM Tuner
EP 1 = 05 STEREO DECODER COMPONENT (IC300)) AM/FM Tuner
EP 1 = 06 LPC COMPONENT (IC401)) AM/FM Tuner
EP 1 = 07 ST EEPROM COMPONENT (IC203)) AM/FM Tuner
EP 1 = 08 DAB COMPONENT DAB Tuner
EP 2 = 00 NO ST ERROR Use EP1
EP 2 = 01 ST WRITE ERROR Use EP1
EP 2 = 02 ST READ ERROR Use EP1
EP 2 = 03 ST CHKSUM ERROR Use EP1
EP 2 = 04 ST READ ERROR ONLY FF Use EP1
EP 2 = 05 ST BLOCK LIMIT Use EP1
EP 2 = 06 ST EEPROM INVALID BLOCK Use EP1
31 DAB_TUNER_FATAL_ERROR
DAB Tuner failure caused by disturbance
in mains. Disconnect mains.
40 RMP STATUS ERROR
EP 1+2 = 0001 RMP START UP MEDIA Use EP3
EP 3 = 01 RMP NO DISC No error
EP 3 = 02 RMP INVALID MEDIA TYPE No error
EP 3 = 03 RMP SUBCODE ERROR No error
EP 3 = 04 RMP START UP TIMEOUT DVDM, SW bug check for Master Unit
SW update
EP 3 = 05 RMP TOC ERROR No error
EP 3 = 1E RMP DOORS NOT CLOSED SW bug, check for AP SW update
EP 3 = 20 RMP DRIVER NOT STARTED SW bug, check for Master Unit SW
update
EP 1+2 = 0002 RMP GOTO TRACK Use EP3
EP 3 = 06 RMP INVALID TRACK NO No error
EP 3 = 07 RMP TRACK NOT FOUND TIMEOUT DVDM, SW bug check for Master Unit
SW update
EP 1+2 = 0003 RMP STOP Use EP3
EP 3 = 08 RMP STOP TIMEOUT No error
EP 1+2 = 0004 RMP PAUSE Use EP3
EP 3 = 09 RMP PAUSE TIMEOUT No error