Bandson 301519/20170209FZ002, Руководство пользователя

Страница: 19 / 28

19
English
15 Temperature and frost alarm
Press the "Wave -" button and keep it pressed to reach the Temperature Settings.
The maximum temperature is +70°C and the minimum temperature is -50°C.
Press the “Wave +” and “Wave -”-button to set the maximum temperature of the
temperature alarm which must not be exceeded. Confirm it with the “MODE”
button.
Press the “Wave +” and “Wave -” button to set the minimum temperature value
which must not be exceeded. Confirm your entry again by pressing the “MODE”
button.
If the frost alarm is turned on, a “snowflake symbol” will appear on the
outdoor temperature display. The frost alarm will sound at -1°C to +3°C.
For the temperature alarm , the “TEMP ALERT” symbol must appear on the
display of the outdoor temperature. The alarm will sound at the previously set
values. If you have activated the frost alarm as well as the temperature alarm,
both symbols will appear on the display. You can end the alarm sounds by press-
ing a button on the weather station.
16 Safety instructions and liability disclaimer
Never try to open the device to carry out repairs or conversions. Avoid contact
with mains voltages. Do not short-circuit the product. The device is not certified
for use in the open air; only use it in dry conditions. Protect it from high humidity,
water and snow. Keep it away from high temperatures. Do not subject the device
to sudden changes in temperature or heavy vibration as this might damage
electronic components. Examine the device for damage before using it. The unit
should not be used if it has received an impact or has been damaged in any other
way. Please observe national regulations and restrictions. Do not use the device
for purposes other than those described in the instructions. This product is not a
toy. Keep it out of the reach of children or mentally impaired persons. Any repair
or alteration to the device not carried out by the original supplier, will invalidate
the warranty or guarantee. The product may only be used by persons who have
read and understood these instructions. The device specifications may change
without any separate prior notice to this effect.