Bandson 301519/20170209FZ002, Руководство пользователя

Страница: 18 / 28

18
English
Press the “MODE” button. The alarm time is shown on the display. Press the
“Wave +” button in the alarm display to turn the alarm on or off. This is illustrated
by a “bell” symbol.
Press the "LIGHT/SNZ" button on the rear side of the weather station to activate
the snooze mode. The alarm will sound again after approx. 5 minutes.
11 Display backlight
Press the "LIGHT/SNZ" button on the rear side of the weather station to activate
the backlight of the weather station display.
12 Barometric pressure
The barometric pressure is indicated in mb/hPa or in HG. Using the "HISTORY"
button on the rear side, you can look back up to 12 hours to see the barometric
pressure at a certain time.
13 Weather forecast
The provisional weather forecast can be found in the top left area of the screen.
The weather forecast is shown in symbols (sunny, slightly overcast, overcast, rainy,
snow). This symbol changes depending on the weather. The trend is shown with
arrows. An explanation for the trend can be found in the chapter "4 Trend".
Note: The weather forecast is calculated by evaluating the barometric pressure
fluctuations and may deviate from the actual weather.
14 Maximum and minimum daily values
Press the "Wave +"-button when the weather station is in standard mode to dis -
play the maximum and minimum daily values. A "MAX" or "MIN" symbol appears
on the display of the outdoor and indoor temperature. If none of these symbols
illuminate, the current temperature and humidity will be displayed. Keep the
"Wave +" button pressed to reset the stored values.