15
OPTIFORMA Frame Heater 2872 01/22
4.4 Power switch
I Switch position ON
○
Switch position OFF
The [power switch] is used to switch the power
supply of the frame heater.
4.5 Air outlet hood
1. Air outlet hood
Large areas of plastic parts of optical frames
can be heated between the air discharge vents
(Fig. 13/1) of the air outlet hoods (Fig. 13) by
holding them in the air flow or moving them
back and forth.
4.6 Heat concentrator nozzle
1. Air discharge opening
2. Guide tracks (on all 4 corners)
The heat concentrator nozzle (Fig. ?) is used
for concentrated heating of plastic parts of op-
tical frames that are held over the air discharge
opening (Fig. ?/1). It is inserted between the
air outlet hoods (Fig. ?) from above. To do this,
the guide tracks (Fig. ?/2) are inserted into the
outer ventilation slots of the air outlet hoods.
4.7 Power plug
The power plug is used to connect the frame
heater to the power supply of the healthcare
establishment.
Fig. 12: Power switch
Fig. 13: Air outlet hood
Fig. 14: Heat concentrator
nozzle
Fig. 15: Power plug
Design and function
