B&R PROVIT 4000, Руководство пользователя

Страница: 20 / 100

2 0
2.3 BEFORE POWER-ON
2.3.1 VOLTAGE SELECTOR SWITCH
The voltage selector switch is optional. It can be found on the left side of the device next to the
power plug. The selector switch is labeled "Voltage Selector".
If the voltage selector is not supplied, the device is equipped with a power supply that has a
voltage range from 90 - 260 VAC.
The PROVIT 4000 Industrial PC can be operated with a supply voltage of 230 VAC (Europe) or 115 VAC (USA).
The voltage selector setting must correspond with the supply voltage to be connected.
Standard setting for the device when delivered is 230 VAC.
2.3.2 POWER CABLE
The power cable is not included with the delivery of the PROVIT 4000 Controller. It must be ordered separately.
The cable is approx. 1.8 m long.
Model Number Power Cable
9A0001.01 Cable with power plug
9A0001.02 Cable without power plug
The connection to the device is made with a screw-on plug. The power mains can be connected with a power
plug or directly to the supply lines.
Attention:
- Only power plugs with protective ground may be used.
- The installation may only be made by qualified personnel.
- Make sure the connection meets the regulations for electrical installations in your area.
2.3.3 FAN
A fan cover and dust filter is included with the delivery of the PROVIT 4000. Mounting procedure for the fan
cover:
- Insert dust filter in the fan cover
- Mount fan cover on fan
The condition of the filter is to be checked regularly. If necessary, the filter must be changed. Spare filters are
available from B&R in 10 packs (5A4001.01).
2.3.4 TERMINAL BLOCK
The terminal block for the relay output is not installed when the device is delivered. It must be installed by the
user.