Software • Windows Embedded Standard 2009
224
Power Panel 500 user's manual V1.40
Function
Included?
Media Player 64
✓
DirectX 9.0c
✓
Accessories
✓
Number of fonts
89
Table 177: Device functions in Windows Embedded Standard 2009
5.5 Installation
Windows Embedded Standard 2009 is already preinstalled on a suitable CompactFlash card by B&R (minimum
1 GB). The system is then automatically configured when it is switched on for the first time. This procedure takes
approximately 10 minutes, with the device being rebooted a number of times.
5.6 Drivers
All drivers required for operation are preinstalled along with the operating system. If an older version of a driver is
still being used, its latest version can be downloaded and installed from the B&R website (
).
It is important that Enhanced Write Filter (EWF) is disabled for this.
5.6.1 Touch screen driver
The touch screen driver is installed automatically during Windows Embedded Standard 2009 setup. If an Automa-
tion Panel 800/900 is connected later on, the additional touch screen interface needs to be selected in the touch
screen settings in the Windows Control Panel. It is important that both the Enhanced Write Filter (EWF) and the
File Based Write Filter (FBWF) are disabled for this.
Information:
Required drivers can only be downloaded from the B&R website, not from manufacturer websites.
5.7 Supported display resolutions
In accordance with Microsoft requirements, Windows Embedded Standard 2009 requires SVGA resolution (800 x
600) or higher in order to allow unimpeded operation of the Windows user interface (including system dialog boxes,
etc.). A lower resolution can be selected for applications.
