B&R 5PP551.0573-00, Руководство пользователя

Страница: 128 / 253

Commissioning • Touch screen calibration
128 Power Panel 500 User's Manual V 1.00
3 Touch screen calibration
B&R touch screen devices are equipped with a B&R touch controller that supports hardware
calibration. This means that the devices are precalibrated from stock. This feature proves ad-
vantageous in the case of a replacement part because a new calibration is no longer required
when exchanging devices (identical model / type). Nevertheless, we recommend calibrating
the device in order to achieve the best results and to better readjust the touch screen to the
user's preferences.
3.1 Windows XP Professional
After installing Windows XP Professional, the touch screen driver must be installed in the device
in order to operate the touch screen. The corresponding drivers can be downloaded from the
download area on the B&R homepage ( www.br-automation.com ).
3.2 Windows Embedded Standard 2009
After first starting Windows Embedded Standard 2009 (First Boot Agent), the touch screen
driver must be installed in the device in order to operate the touch screen. The correspond-
ing drivers can be downloaded from the download area on the B&R homepage ( www.br-
automation.com ).
3.3 Windows 7
After installing Windows 7, the touch screen driver must be installed in the device in order to
operate the touch screen. The corresponding drivers can be downloaded from the download
area on the B&R homepage ( www.br-automation.com ).
3.4 Windows Embedded Standard 7
A touch screen driver will be automatically installed if a touch controller is detected during the
Windows Embedded Standard 7 setup.
The touch screen driver must be installed manually if a touch controller was not detected during
the Windows Embedded Standard 7 setup or if a an Automation Panel 800/900 has been
connected after setup. The corresponding drivers can be downloaded from the download area
on the B&R homepage ( www.br-automation.com ).
3.5 Automation Runtime / Visual Components
The first time the touch screen is used, it must be calibrated once in the customer application
for the existing device and project.