B&R 5PC600.SE00-00, Руководство пользователя

Страница: 295 / 594

Software • BIOS options
Section 4
Soft
w
are
295 Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
Redirection after
BIOS POST The redirection after start up can be set
here, as long as disabled is not entered in
the
remote access field.
Disabled The redirection is switched off after start up.
Boot loader Redirection is enabled during system start up and
charging.
Always Redirection is always enabled.
Terminal type The type of connection can be chosen
here, as long as disabled is not entered in
the
remote access field.
ANSI, VT100, VT-UTF8 Manual configuration of the connection type.
VT-UTF8 Combo
Key Support With this option, the VT-UTF8 Combo Key
Support for the ANSI and VT100
connections can be enabled, as long as
disabled is not entered in the
remote
access field.
Disabled Disables this function.
Enabled Enables this function.
Sredir Memory
Display Delay The memory output delay can be set
using this option, as long as disabled is
not entered in the
remote access field
(Sredir -> serial redirection).
No delay No delay.
Delay 1 sec, Delay 2 sec,
Delay 4 sec
Value set manually.
Serial port BIOS
update During system start up, the update is
loaded via the serial interface in the
processor.
Information:
If this option is disabled, the boot time
is reduced.
Disabled Disables this function.
Enabled Enables this function.
BIOS setting Meaning Setting options Effect
Table 184: X945 Advanced Remote Access Configuration setting options (cont.)