B&R 5PC600.SE00-00, Руководство пользователя, Страница: 224 / 594

224
Commissioning • Connection examples
Automation PC 620 with 945GME N270 CPU board User's Manual V 1.10
4.4 An Automation Panel 800 via SDL (onboard)
An Automation Panel 800 is connected to the integrated SDL interface (onboard) via an SDL
cable. USB devices can only be connected directly to the extension keyboard (without a hub).
4.4.1 Basic system requirements
The following table shows the possible combinations for the APC620 system unit with CPU
board to implement the configuration shown in the figure above. If the maximum resolution is
limited when making the combination then it is also shown in this table.
4.4.2 Cables
Select an SDL cable from the following table.
Figure 97: Configuration - An Automation Panel 800 via SDL (onboard)
CPU board with system unit Restriction
Resolution
5PC600.SX01
-00
5PC600.SX02
-00
5PC600.SX02
-01
5PC600.SF03
-00
5PC600.SX05
-00
5PC600.SX05
-01
5PC600.SE00
-00 / -02
5PC600.X945-00
✓
-
✓
- -
✓ ✓
max. XGA
Table 126: Possible combinations of system unit and CPU board
Model number Type Length
5CASDL.0018-20 SDL w/o extender 1.8 m
5CASDL.0050-20 SDL w/o extender 5 m
5CASDL.0100-20 SDL w/o extender 10 m
5CASDL.0150-20 SDL w/o extender 15 m
5CASDL.0200-20 SDL w/o extender 20 m
5CASDL.0250-20 SDL w/o extender 25 m
5CASDL.0300-30 SDL w/ extender 30 m
5CASDL.0400-30 SDL w/ extender 40 m
Table 127: Cables for SDL configurations
✓
0
Automation PC 620
SDL segment 1
max. 40 meters
Graphics Engine 1
x Internal APC620 panel number
Monitor / panel
connection
Automation Panel 800
✓
USB OK
1
3
2
Independent of segment length