Installation and wiring
5.5 Connecting cables
Information:
B&R generally recommends connecting swing
arm devices to the Automation PC via SDL4 in-
stead of SDL. The Cat 6 / Cat 7 cables used with
SDL4 are much easier to install and connect.
When connecting or installing cables, the bend radius
specification must be observed. For this specification,
see the technical data of the respective cable.
The maximum tightening torque of the locating screws is
0.5 Nm.
2
2
1
1)
Bend radius
2)
Locating screws
78
Automation Panel 9x3 User's manual 2.01
