The depth stop (9) is just for indicating the drilling depth and cannot
withstand a large pressing force. Slow down your feeding speed/force
of drilling to prevent depth stop from displacing or damaging when the
target depth is nearly reached.
Use
Intended use
The power tool is intended for hammer drilling and light-duty chiselling work into
concrete, brick and stone when equipped with SDS-Plus bits. It is also suitable for
coarse drilling operations into wood, wood similar materials, plastic and metal when
using an optional keyed drill chuck.
Before you start
01
Protection
Controls
01
Rotation stop switch (Fig. D)
WARNING!
Only change the mode settings when the product is switched
off and has come to a complete stop! Always ensure that the mode
selector is adjusted to the correct position depending on the intended
operation! Do not use the product with the switch in any intermediate
position!
17
