Installation
13
automatic configuration of secure Wi-Fi networks between two WPS
supported devices. If your wireless adapter supports WPS, the WPS
feature can be a user-friendly and simple process to get your Wi-Fi
network up and running.
1. Enable WiFi.
2. Press and hold the WPS button for at least 5 seconds.
WPS
connecting
is displayed.
3. Confirm the WPS option on your wireless adapter trying to connect
to the device.
New device connected
is displayed. If you do not
confirm the WPS connection within 2 minutes,
No Device found
is
displayed and you must begin the process again.
When WPS is enabled, the screen automatically reverts to the Main
Screen after a period of inactivity when WPS is enabled.
Notifications
If the firmware version on the device is being updated via the Web
interface, the screen informs the user of the process.
If the user has enabled the PIN security protection on the SIM card, the
screen directs the user to access
4G LTE > PIN Verification
via the web
interface before proceeding to use the Internet connectivity features of
the device.
Содержание R501
