Na and Navionics Platinum. For a full selection of available charts, visit
www.gofreemarine.com, www.c-map.com or www.navionics.com.
1.
Position at least two routepoints on a new route, or open an existing route for editing.
2.
Select
Dock-to-dock Autorouting
, followed by:
-
Entire Route
if you want the system to add new routepoints between the first and the
last routepoint of the open route.
-
Selection
if you want to manually select the routepoints that define the limits for the
autorouting, then select the relevant routepoints. Selected routepoints are colored red.
Only two routepoints can be selected, and the system discards any routepoints
between your selected start and end points.
3.
Select
Accept
to start the automatic routing.
- When the automatic routing is completed the route appears in preview mode, and the
legs are color coded to indicate safe or unsafe areas. Navionics uses red (unsafe) and
green (safe), while C-MAP uses red (unsafe), yellow (dangerous) and green (safe).
4.
Move any routepoints if required when the route is in preview mode.
5.
Select
Keep
to accept the routepoints positions.
6.
Eventually repeat step 2 (
Selection
) and step 3 if you want the system to automatically
position routepoints for other parts of the route.
7.
Select
Save
to complete the automatic routing and save the route.
Dock-to-dock Autorouting and Easy Routing examples
•
Entire route
option used when first and last route points are selected.
First and last routepoint
Result after automatic routing
•
Selection
option used for autorouting part of a route.
Two routepoints selected
Result after automatic routing
PredictWind weather and routing
For information about PredictWind weather and PredictWind routing, refer to
Waypoints, Routes, and Tracks
| Zeus3 Operator Manual
39
Содержание Zeus3 Glass Helm
Страница 1: ...ENGLISH Zeus3 Operator Manual www bandg com ...
Страница 2: ......
Страница 140: ... 988 11377 001 0980 ...