B&G Vulcan R, Руководство по установке

Страница: 51 / 72

Assigning the dipswitch setting
Every product capable of controlling and viewing CZone devices
must be assigned a virtual dipswitch setting. This setting is unique
for each device. Typically it is set after the configuration file already
exists on the CZone system, but it may also be set in advance. To do
so, access the CZone menu on the Settings page.
When the configuration is already available on the network, it will
immediately commence uploading to the Vulcan Series once the
dipswitch is set. Allow this to complete, without interruption.
Setting CZone to display at startup
With this option selected, the CZone control page is shown first,
every time the Vulcan Series is powered up.
CZone backlight control
Enabling this causes the Vulcan Series to synchronize its backlight
setting with that of any CZone Display Interfaces set up to share
backlight settings.
Ú
Note:
CZone Config also needs to have the Vulcan Series set as
a controller.
Wireless setup
The unit includes built-in wireless functionality that lets you:
• Use a wireless device to remotely view (smartphone and tablet)
and control the system (tablet only). Wireless devices use the
GoFree app downloaded from their relevant application store.
• Access the GoFree Shop.
Software Setup | Vulcan R Series Installation Manual
51