B&G Vulcan 12, Инструкция по эксплуатации

Страница: 53 / 68

CZone setup
In order to communicate with the CZone modules connected to
the network, the unit must be assigned a unique CZone Display
Dipswitch setting.
The functionality of the CZone system is determined by the CZone
Config File which is stored on all CZone modules and the Vulcan
Series. The file is created using the CZone Configuration Tool, a
specialized PC application available from BEP Marine Ltd, and
associated CZone distributors.
For more information, refer to the documentation provided with
your CZone system.
Assigning the dipswitch setting
Every product capable of controlling and viewing CZone devices
must be assigned a virtual dipswitch setting. This setting is unique
for each device. Typically it is set after the configuration file already
exists on the CZone system, but it may also be set in advance. To do
so, access the CZone menu on the Settings page.
When the configuration is already available on the network, it will
immediately commence uploading to the Vulcan Series once the
dipswitch is set. Allow this to complete, without interruption.
Setting CZone to display at startup
With this option selected, the CZone control page is shown first,
every time the Vulcan Series is powered up.
Backlight
Enabling this causes the Vulcan Series to synchronize its backlight
setting with that of any CZone Display Interfaces set up to share
backlight settings.
Ú
Note:
CZone Config also needs to have the Vulcan Series set as
a controller.
3rd party support | Vulcan Series Installation Manual
53