background image

| 123

Appendices | 

V90S User Manual

• 

The lower frequency portion of these channels may be operated 
as single frequency channels by ship and coast stations.

• 

Transmission using the upper frequency portion of these channels 
is limited to coast stations.

• 

If permitted by administrations and specified by national 
regulations, the upper frequency portion of these channels may 
be used by ship stations for transmission. All precautions should 
be taken to avoid harmful interference to channels AIS 1, AIS 2, 
2027* and 2028*.  (WRC-15)

* From 1 January 2019, channel 2027 will be designated ASM 1 
and channel 2028 will be designated ASM 2.

n)  With the exception of AIS, the use of these channels (75 and 76) 

should be restricted to navigation-related communications only 
and all precautions should be taken to avoid harmful interference to 
channel 16, by limiting the output power to1W.  (WRC-12)

o)  (SUP - WRC-12)

p)  Additionally, AIS 1 and AIS 2 may be used by the mobile-satellite 

service (Earth-to-space) for the reception of AIS transmissions from 
ships.  (WRC-07)

q)  When using these channels (10 and 11), all precautions should be 

taken to avoid harmful interference to channel70.  (WRC-07) In the 
maritime mobile service, this frequency is reserved for experimental 
use for future applications or systems (e.g. new AIS applications, 
man over board systems,etc.).If authorized by administrations for 
experimental use, the operation shall not cause harmful interference 
to, or claim protection from, stations operating in the fixed and 
mobile services.  (WRC-12)

r)  Channels 75 and 76 are also allocated to the mobile-satellite service 

(Earth-to-space) for the reception of long-range AIS broadcast 
messages from ships (Message 27; see the most recent version of 
Recommendation ITU-RM.1371).   (WRC-12)

w.  In Regions 1 and 3:

Until 1 January 2017, the frequency bands 157.200-157.325 MHz 
and 161.800-161.925 MHz (corresponding to channels: 24, 84, 25, 85, 
26 and 86) may be used for digitally modulated emissions, subject 
to coordination with affected administrations. Stations using these 
channels or frequency bands for digitally modulated emissions shall 
not cause harmful interference to, or claim protection from, other 
stations operating in accordance with Article 

5

.

Содержание V90S







































































































































Отзывы: