B&G V90S, Руководство пользователя

Страница: 36 / 134

36 |
Waypoint procedures | V90S User Manual
Waypoint procedures
A waypoint refers to the latitude, longitude and name of a place that
you have entered into the radio. A waypoint can be a destination, a
point along a planned course, or any location useful for navigation,
such as a fishing spot.
You can use waypoints as follows:
•
Display the coordinates, bearing and distance to a waypoint on the
standby screen. See “Navigating to a waypoint” on page 38.
•
Output a waypoint’s coordinates and other details via NMEA 2000
for display on a chart plotter or other compatible device. See
“Sending waypoint data to a chart plotter” on page 39.
¼
Note:
The V90S can store up to 200 waypoints.
Adding a new waypoint
1.
Select MENU
→
WAYPOINT
→
WP LIST.
Your waypoint list will be displayed.
2.
Press [OK].
NEW WP starts to flash.
3.
Press [OK] again to add a new waypoint.
4.
Enter a waypoint name (maximum 6 characters).
5.
Enter the latitude. Use
▲
or
▼
key to select N or S as required, and
then press [OK] to move to the longitude setting.
6.
Enter the longitude. Press [OK] once you have selected E or W.
7.
When prompted, select YES or NO to save the new waypoint.
¼
Note:
When the waypoint list is full, you must delete an entry before
you can create a new entry.
4
MENU SELECT
WAYPOINT
N2K DATA
VOICE REC
BACKLIGHT
USA
C
16
Hi
DSC
PRI
WAYPOINT
NEAREST WP
WP LIST
USA
C
16
Hi
DSC
PRI
WP LIST
NEW WP
USA
C
16
Hi
DSC
PRI
SAVE
YES
NO
Lo
USA
C
16
Hi
DSC
PRI