B&G LCD Plotter
Part 2 - Operating Information
HB-0847-02
2-17
make it reappear, press the CURSOR key. To deactivate it, press DATA.
The unit is in editing mode when the cross-hair is displayed.
2.14
PLOTTING A ROUTE
2.14.1 Create or Edit
Move the cursor with the arrow keys to the desired position, press the
ENTER key to insert the waypoint. Move the cursor to the next position and
press ENTER to insert the second waypoint. Repeat this procedure for the
remaining waypoints in your route. Up to 40 waypoints maybe entered per
route.
2.14.2 Delete Last Waypoint
Press the CLEAR key. If the last waypoint is placed out of the screen, the
message “LAST WAYPOINT OUT OF SCREEN!” will appear.
2.14.3 Delete a Waypoint
Position the cursor with the arrow keys on the waypoint to delete and press
CLEAR.
2.14.4 Delete all Waypoints
Press the CLEAR key repeatedly until the message “NO MORE
WAYPOINTS” is displayed.
2.14.5 Moving a Waypoint
Position the cursor (cross-hair) with the cursor keys onto the waypoint to be
moved. The waypoint will begin to flash. Press the ENTER key to select the
waypoint and using the cursor keys, position the waypoint to the new
location. Press the ENTER key again. A help window gives the current
cursor position and facilitates the operation.
2.14.6 Inserting a Waypoint
Move the cross-hair cursor to the selected route segment to insert the new
waypoint. The route segment will begin to flash when the cross-hair is
placed over the segment. Next, press ENTER to display the new waypoint
www.bandgservice.co.uk
+44 (0)1590 689699
