![background image](http://html2.mh-extra.com/html/bandelin/sonorex-technik-tg-series/sonorex-technik-tg-series_assembly-instructions-manual_3053990006.webp)
8
SONOREX TECHNIK TG 1503
3
4
7
6
1
2
5
8
1
2
SONOREX TECHNIK TG 3003
3
4
7
6
5
6 / 25
23526b GB/2019-07
1
electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • [email protected]
1
Product description
High-performance ultrasonic generator of type SONOREX TECHNIK TG ...
The exact type speci
fi
cation and the serial number are found on the type plate,
on the underside of the ultrasonic bath.
- The generator is a microprocessor-controlled ultrasonic generator.
Each HF unit can be programmed with an output from 300 to 1500 W.
The operating frequencies are 25 kHz as standard, or alternatively 40 kHz.
- Individual or combined ultrasonic systems
(e.g., immersible transducers) of the same or also different frequencies
can be connected to a TG 3003 generator. The HF units are programmed to
the intended operating frequency by the manufacturer
(see label(s) on the rear side).
- The HF units are open-circuit and short-circuit proof and feature monitoring
circuits that are triggered immediately in the case of an error. The most
important operating functions are controlled and regulated via a interface.
Product features:
• High-performance ultrasonic generator in a low-maintenance, robust aluminium
housing (1) with connections for diverse ultrasonic transducers.
• HF unit (2), depending on features up to two units can be plugged in.
• The power switch (3), the HF connection (4), the remote control connection (5),
the connection for the serial interface (6), the mains cable (7) and the fan (8) to cool
the HF units are located on the rear side.