BANDELIN Sonorex Digitec DT 510 F, Инструкция пользователя

Страница: 7 / 32

7 / 32 51326c GB/2017-06
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
1.2 Purpose
General application
The SONOREX ultrasonic baths with their fl at baths were developed for the preparation of
samples in laboratories, clinics and academic research.
With corresponding accessories, it is possible to sonicate samples in laboratory
fl asks of different
shapes and sizes. The samples can be sonicated both for a de fi ned time and also in continuous
operation. It is not permissible to prepare objects to be cleaned in the ultrasonic baths.
Application examples:
- Preparation of samples
- Even, indirect sonication of the samples
- Homogenisation
- Rapid
degasi fi cation of samples
e.g., in medical diagnostics, environmental and foodstuff analysis and ultrasonic chemistry.
Sonication is always carried out in connection with a suitable preparation that is added to the bath
fl uid.
For correct use, the supplied beaker holder or another holder is required for storing the inset
beakers with the samples during the sonication. Nothing must stand or lie directly on the bottom of
the bath – this is the only way to ensure optimal diffusion of the ultrasound.
The ultrasonic bath is operated from the front. The operation is usually carried out on a table.
In vitro diagnostic laboratory procedures ( preparation of samples)
The SONOREX ultrasonic baths can be used for in vitro diagnostic preparation or laboratory
procedures (e.g., preparation of samples) in which medical information is gathered from the
ultrasonic treatment of organic or inorganic material.
In this case, they are classi
fi ed and treated in accordance with the Directive 98/79/EC on in vitro
diagnostic medical devices.
1.3 CE conformity
SONOREX ultrasonic baths are declared as IVD products and satisfy the CE marking criteria for
the European Directives:
- "IVD" directive
- "Low-voltage directive"
- "Electromagnetic compatibility" directive
in their currently valid versions.
A declaration of conformity can be requested from the manufacturer by providing the serial
number.