BANDELIN Sonopuls HD 4050, Руководство по эксплуатации

Страница: 30 / 42

Ultrasonic converter
Step/booster horn
Vigorously turn sickle spanner
HS 40/42 long, in the opposite
direction
30 / 42 51376-012 en/2022-09
1 electronic GmbH & Co. KG • Heinrichstraße 3-4 • 12207 Berlin • Deutschland • info@bandelin.com
4.4 Dismounting and mounting the standard/booster horns
Standard/booster horns
• are screwed onto the respective ultrasonic converter,
• are made of high-strength titanium alloy,
• transmit the oscillations to the probe,
• enhance the amplitude thanks to their geometry.
At the time of delivery, standard horn SH 100 G is fi rmly mounted onto the UW 100, and booster
horn SH 200 G is fi rmly mounted onto the UW 200.
Before mounting the standard/booster horns, the ultrasound generator must be turned o ff
and the ultrasonic converter must be disconnected from the ultrasound generator.
Video available at:
https://www.youtube.com/watch?v=NXbGc6nAb5c
Disassembly

Release the permanently mounted standard/booster horn SH from the ultrasonic converter
UW. To do so, place the ultrasonic converter on a fi rm base (non-slip, if possible).
 Place one sickle spanner on the ultrasonic converter and the other sickle spanner
on the standard/booster horn. To dismount, press the fi rst sickle spanner against the fi rm
base, and very fi rmly press the other sickle spanner in the opposite direction.
 One sickle spanner is part of the scope of delivery of one standard/booster horn.